Konaktelcit
Gates & AccessoriesGATE

Trackless Gate

Cantilever sliding gate requiring no ground rail, 3–12m width

Trackless Gate

The Trackless Gate is a cantilever sliding gate system that operates without requiring a ground rail to be laid across the access way. It accommodates widths of 3000–12000mm and heights of 1000–2400mm, with optional motor support, adapting to vehicle entrances of any scale.

Quick Specs
Post / Leaf ProfileHollow Section
Bulk QuoteWhatsAppDownload Datasheet
Quality & Certifications

Internationally accredited, certified manufacturing

  • ISO 9001:2015
    Quality Management System
  • ISO 14001:2015
    Environmental Management System
  • ISO 45001:2018
    Occupational Health & Safety Management System
  • TSE
    Turkish Standards Compliance
Safe Movement Without a Ground Rail
01

Safe Movement Without a Ground Rail

The cantilever design means no rail is laid across the opening; the gate transfers its weight to the roller system on the support post and slides smoothly. With a complete set of components ready for motorised automation, safety sensors and lock integration, it runs without interruption at wide vehicle crossings.

Production Process

Integrated production from raw material to quality control

  1. 01

    Hollow sections are cut and drilled on CNC machines

  2. 02

    The leaf frame is joined by MIG welding

  3. 03

    The panel infill (Double or Single) is mounted into the frame

  4. 04

    The 18 mm rod rail and carrying roller system are fitted

  5. 05

    Hot-dip galvanising and powder coating are applied

  6. 06

    The motor connection is prepared to order before dispatch

Use Cases

Engineered solutions for every sector

  • Vehicle entrances on snowy and icy ground

  • Entrances paved with asphalt or concrete where a rail cannot be set in

  • Vehicle gates at factories, warehouses and logistics centres

  • Main gates of housing estates and secured areas

  • Secure passages integrated with motorised automation systems

Dimensions & Configuration

Height, weight and recommended post spacing

Post ProfileBox section
Leaf ProfileBox section
Gate InfillDouble Panel or Single Panel
Rail18mm Rod
Lock and HandleOptional
MotorOptional
Height1000–2400mm
Width3000–12000mm
Colour & Coating

Two-layer galvanised + PVC protection

  • RAL 6005#2F4538
  • RAL 7016#293133
  • RAL 9005#0E0E10
  • Custom Colour#CCCCCC
Technical Specifications
Post ProfileBox section
Leaf ProfileBox section
Gate InfillDouble Panel / Single Panel
Rail18mm Rod
Lock and HandleOptional
MotorOptional
Height1000–2400mm
Width3000–12000mm
CoatingGalvanised + powder coating
Detailed Description

The Trackless Gate is a cantilever sliding gate system that requires no ground rail along the opening. Instead of a rail embedded in the access way as used in traditional sliding gates, the entire gate load is transferred to the support post on the drive side, enabling uninterrupted operation on snowy, icy, sloped, or surfaced ground.

The hollow-section post and leaf structure is supported by an 18mm rod rail and a carrying roller system. The gate infill can be specified as a Double Panel or Single Panel. A lock-and-handle set and motorised automation system can be added as optional extras; the motor connection is pre-wired at the factory before despatch.

Height can be ordered between 1000mm and 2400mm, and width between 3000mm and 12000mm. Powder coating over a galvanised substrate ensures long-lasting surface protection against outdoor conditions.

Bulk Quote

Trackless Gate

WhatsAppBulk Quote

Product Code

PRD-0035

Gates & Accessories

MANUFACTURER · FACTORY

Trackless Gate Manufacturer

Trackless Gate is manufactured directly by Konak Tel Çit at its factory in Aksaray; not outsourced, but produced in house from start to finish. A panel leaf is fitted to a cantilever (trackless) sliding system; hinges/rails, lock and closing hardware are fitted with care, then finished with galvanizing plus powder coating.

Quality assurance: production certified to ISO 9001, ISO 14001, ISO 45001 and CE; every batch is checked for weld strength, mechanism and coating.

Manufacturer Profile

Integrated factory production in Aksaray since 1972

Founded
1972
Production Sites
2
Export Reach
80+ Countries
Annual Capacity
60,000 tons
Covered Area
20,000 m²
Quality
ISO · CE · TSE
Logistics & Shipping

Nationwide shipping in Türkiye and exports to 80+ countries

  • Minimum Order
    1 piece
  • Packaging
    Palletised packaging
  • Exports
    80+ countries
SSS

Frequently Asked Questions

4 questions · technical, installation and ordering details

No rail is laid across the opening. The gate carries its full weight on rollers and a cantilever arm mounted on the support post at the drive side, which leaves the ground along the opening completely clear.
On a sliding gate a ground rail is laid across the opening and the gate runs along it on wheels. A cantilever gate has no ground rail; it is carried by rollers and a cantilever arm on the drive side, supported by a buffer plate and end wheel. Where the ground is snowy, icy or paved and cannot be cut, the cantilever version is the better choice.
It closes openings up to 12000 mm. The minimum width is 3000 mm.
Yes. When the motor is specified with the order, the mechanical and electrical preparation is carried out and the gate is dispatched ready for it.
Related Products

Gates & Accessories

Our Products
Bulk QuoteWhatsApp