Konaktelcit
Fencing3D

3D Panel Fence

Welded V-crimp galvanised panel · high structural rigidity, easy installation

3D Panel Fence

A security fence system composed of welded mesh panels manufactured from galvanised steel wire, offering exceptional durability through V-shaped horizontal crimps.

Quick Specs
CoatingGalvanised + Nano + Powder Coat
  • Height Range
    630–3030mm
  • Wire Diameter
    4–5mm
  • Panel Width
    2500mm
Bulk QuoteWhatsAppDownload Datasheet
Quality & Certifications

Internationally accredited, certified manufacturing

  • ISO 9001:2015
    Quality Management System
  • ISO 14001:2015
    Environmental Management System
  • ISO 45001:2018
    Occupational Health & Safety Management System
  • CE
    CE Declaration of Conformity (EN 10223-4)
  • TSE
    Turkish Standards Compliance
V-Crimp: Invisible Strength
01ENGINEERING

V-Crimp: Invisible Strength

Horizontal V-crimps give every panel the ability to act as an independent load-bearing element. The result: up to 40% greater bending resistance at the same wire diameter, fewer posts, and a cleaner fence line.

  • Three-dimensional horizontal V profile: bi-directional rigidity
  • Up to 40% greater bending resistance versus a flat panel
  • Ø4–5 mm wire options to suit every application
  • EN 10244 certified wire raw material
Production Process

Integrated production from raw material to quality control

  1. 01

    Steel Sourcing

    High-carbon steel wires are sourced from accredited suppliers to EN 10244 standard.

  2. 02

    Hot-Dip Galvanising

    Wires are immersed in a 450 °C zinc bath to provide full corrosion protection.

  3. 03

    V-Form Bending

    CNC-controlled machines form the horizontal V-crimps on every panel to millimetre tolerance.

  4. 04

    Automatic Welding

    Horizontal and vertical wires are fusion-welded together on multi-point welding lines.

  5. 05

    Electrostatic Powder Coating

    UV-resistant polymer powder coating in RAL colours to EN 13438 standard is applied electrostatically.

  6. 06

    Quality Control

    Every batch undergoes dimensional, coating thickness, and tensile strength testing; dispatched with a certificate.

From Raw Material to Site: One Facility
02FACTORY

From Raw Material to Site: One Facility

At our facility in Aksaray, with 20,000 m² of covered space, the entire process, from steel procurement and the galvanising bath to V-form bending and electrostatic powder coating, takes place under one roof. Not a single step is subcontracted; quality is single-source, traceable, and certified.

  • Uninterrupted production since 1972
  • 60,000-tonne annual production capacity
  • Traceable QC certificate for every batch
  • Exports to 80+ countries: container-ready packaging
Use Cases

Engineered solutions for every sector

  • Residential & Gardens

    Boundary demarcation for villas, housing estates, and detached homes; safety for pets and children.

  • Industrial Facilities

    Security perimeter for warehouses, factories, and Organised Industrial Zones (OIZ); barrier against theft attempts.

  • Public Areas

    Controlled access at school grounds, hospital perimeters, and public parks.

  • Agriculture & Livestock

    Protection of agricultural land against wildlife; zone separation on farms.

  • Sports Facilities

    Perimeter fencing for football, basketball, and tennis courts; stadium barriers.

Dual-Layer Protection. Maintenance-Free for Years.
03DURABILITY

Dual-Layer Protection. Maintenance-Free for Years.

Steel is first protected by hot-dip galvanising (EN ISO 1461, 275–350 g/m² zinc). On top of this, UV-resistant polymer powder coating to EN 13438 standard is applied electrostatically. The result: a fence that does not rust, does not fade, and requires no annual maintenance.

  • Rust-free galvanising for up to 25 years in inland regions
  • EN 13438 UV-resistant powder coating: 10+ years colour stability
  • 4 standard RAL colours + project-specific custom colour
  • 10-year galvanising warranty, 5-year powder-coating warranty
Dimensions & Configuration

Height, weight and recommended post spacing

Height (mm)Weight (kg/panel)Panel Width (mm)Recommended Post Spacing (mm)
6306.125002500
8308.125002500
103010.025002500
123012.025002500
153014.925002500
173016.825002500
193018.825002500
233022.725002500
253024.625002500
273026.625002500
303029.525002500
Colour & Coating

Oven-cured electrostatic powder coating

  • RAL 6005#2a4d31
    Green
    Powder Coated
  • RAL 9005#0a0a0a
    Black
    Powder Coated
  • RAL 7016#373f43
    Anthracite
    Powder Coated
  • Custom RAL#d4d4d8
    Powder Coated
Technical Specifications
Wire DiameterØ4.00×4.00 / Ø4.50×4.50 / Ø4.00×5.00 / Ø5.00×5.00 mm
ManufactureWelded mesh panel with V-shaped horizontal bends (single-bar or double-bar bend)
Standard Panel Width2500 mm
Height Options630 / 830 / 1030 / 1230 / 1530 / 1730 / 1930 / 2330 / 2530 / 2730 / 3030 mm
Post TypeBox section
CoatingGalvanised + nano coating + polyester electrostatic powder coating (black, anthracite, green or custom RAL)
Detailed Description

What Is a 3D Panel Fence?

A 3D panel fence is a modern security fencing system comprising welded mesh panels manufactured from galvanised steel wire, offering high tensile strength through its distinctive V-shaped horizontal crimps. The "3D" in its name refers to the panel's horizontally crimped structure; these crimps impart extra rigidity to the panel, increasing resistance to bending and external impact.

Key Features

  • Galvanised Coating: Provides long-lasting protection against rust and corrosion.
  • Electrostatic Powder Coating: Available in black, anthracite, green and custom RAL colours; high UV resistance.
  • Multiple Heights: Available in 11 heights from 630 to 3030 mm to suit every application.
  • V-Crimp Structure: Horizontal crimps provide extra durability against impact and bending.
  • Easy Installation: Saves time and labour thanks to the practical clamp-and-post connection system.

Advantages

  • Durable and long-lasting: dual-layer galvanised + electrostatic powder coating protection
  • Easy installation: practical post-and-clamp system
  • Cost-effective solution: low lifecycle cost
  • Aesthetic appearance: modern V-crimp design
  • Maintenance-free: no annual painting or labour investment for years
  • Strong security: resistant to climbing and cutting
  • Environmentally friendly: manufactured from recyclable materials

We accept orders in galvanised-only or galvanised + electrostatic powder coating options at all heights. Please contact us for project-specific custom colours and panel dimensions.

Bulk Quote

3D Panel Fence

WhatsAppBulk Quote

Product Code

PRD-0010

Fencing

MANUFACTURER · FACTORY

3D Panel Fence Manufacturer

3D Panel Fence is manufactured directly by Konak Tel Çit at its factory in Aksaray; not outsourced, but produced in house from start to finish. The line wires are first shaped into the characteristic V-bend, then spot-welded automatically at every intersection to yield flat, distortion-free panels. Hot-dip galvanizing is followed by coloured PVC or electrostatic powder coating for double protection.

Quality assurance: production certified to ISO 9001, ISO 14001, ISO 45001 and CE; every batch is checked for dimensions, weld strength and coating thickness.

Manufacturer Profile

Integrated factory production in Aksaray since 1972

Founded
1972
Production Sites
2
Export Reach
80+ Countries
Annual Capacity
60,000 tons
Covered Area
20,000 m²
Quality
ISO · CE · TSE
Logistics & Shipping

Nationwide shipping in Türkiye and exports to 80+ countries

  • Panels per Pallet
    200
  • Pallets per Container
    20
  • Lead Time (days)
    7–10
  • Exports
    80+ countries
SSS

Frequently Asked Questions

14 questions · technical, installation and ordering details

The 3D panels we manufacture at Konak Tel Çit improve bending and impact resistance by up to 40% compared to flat 2D panels, thanks to their horizontal V-crimp profile. Because a considerably more rigid structure is achieved at the same wire diameter and height, fewer intermediate posts are needed on site, reducing both installation time and total cost. Aesthetically, the three-dimensional surface texture also offers a modern architectural language in place of the monotonous appearance of a 2D panel. Unless there is a tight short-term budget constraint, we always recommend the 3D panel: maintenance and replacement costs over the life of the project remain well below those of a 2D panel.
Our standard recommendations by application type are as follows: 1000–1500 mm for villa and housing estate gardens, 1500–2000 mm for school and institutional perimeters, 2000 mm for industrial and logistics facilities, and 2730–3030 mm for sports grounds. In areas with a climbing risk, we add supplementary security wire or razor wire above the 2000 mm panel. If your project has application-specific additional requirements (for example, preventing dogs escaping or child safety) we offer a free technical consultation by phone or WhatsApp.
4 mm wire is sufficient for garden, residential, and light commercial applications; its lighter weight also facilitates installation. 5 mm wire is the preferred choice for medium-intensity-use locations such as schools, hospitals, and shopping centres; it offers noticeably greater resistance to vandalism. 6 mm wire is suitable for industrial facilities, warehouses, energy infrastructure, and security-critical projects, providing maximum resistance to cutting and bending attempts. When in doubt about wire diameter, we at Konak Tel Çit recommend sharing the specifics of your application and receiving a free technical recommendation.
The wires used in Konak Tel Çit 3D panels are hot-dip galvanised and reach a zinc coating thickness of 275–350 g/m² to EN ISO 1461 standard. This value is 3–5 times that of the electrolytic galvanising commonly available on the market. They can be used without rusting for 15 years in coastal and seaside salt-atmosphere conditions, and 25 years in low-humidity, low-salt inland environments. When electrostatic powder coating is added, the zinc layer is also protected from mechanical impacts, extending the total service life beyond 30 years.
The electrostatic powder coating applied in our factory contains UV-resistant polymer paint certified to EN 13438 standard. In 10-year field tests under intense sunlight and humidity conditions, colour change remained at ΔE < 2, an imperceptible deviation to the naked eye. The most stable colours are RAL 6005 (dark green) and RAL 9005 (black); RAL 7016 (anthracite grey) is also popular in architectural projects. We can also produce custom RAL colours outside the standard catalogue; a minimum order quantity applies for this option.
The reference post spacing for our standard 2500 mm wide panels is 2500 mm; this dimension optimises the clamp installation allowance and horizontal tension. We recommend reducing the spacing to 2000 mm in high-wind coastal areas or for applications exceeding 2000 mm in height. If a structural calculation is required for projects needing planning permission, the Konak Tel Çit engineering team can provide support.
The Konak Tel Çit team applies two different methods depending on the project. In stepped installation, each panel is positioned according to the step height of the ground gradient; the appearance is stepped but forms an absolutely secure fence line. In raked (rampé) installation, the clamp angle is matched to the gradient of the land; the aesthetic looks neater but gaps at the base may appear when the ground slope exceeds 15°. A site survey or sharing a gradient sketch is sufficient to decide which method is appropriate.
Our standard accessories cover 90° corners, 45° and 120° open-angle turns, and U-turns. The reinforced corner posts used at corners and turning points are secured with double clamps, ensuring continuous tension transfer. Where gaps are less than 2000 mm wide, we manufacture split short panels; we can produce these down to a minimum of 500 mm. If you share a project plan or site layout, we can draw up the accessories list and calculate the cost in advance.
Thanks to the dual-layer galvanised + electrostatic powder coating protection on Konak Tel Çit 3D panels, routine maintenance is reduced to virtually zero. An annual visual inspection (checking for damaged panels, loose clamps, or early signs of rust) is sufficient. At coastal facilities, an annual rinse with fresh water extends the service life significantly. We recommend additional inspection in areas with high irrigation or chemical exposure; our technical support line is free of charge for such situations.
Yes, the modular system design was developed precisely for this convenience. The clamps of the damaged panel are removed and the new panel is fitted; adjacent panels and posts are unaffected in any way. We keep the 2500 mm standard panel size permanently in stock at Konak Tel Çit; spare parts can be found even years after the factory has closed. For overseas projects, we ship one or more spare panels as reserve stock to optimise freight.
There is no minimum order quantity for stock products; we serve customers who need just a single panel. For orders in custom colours (RAL outside the standard catalogue) or non-standard sizes, our minimum production condition is 1 pallet (approximately 200 panels). For export projects, our team prepares the most suitable packaging plan to optimise the container. For large project quotations, a per-metre and height breakdown allows us to submit a price offer within the day.
The anticipated lead time is 3–5 working days for stock products, 7–10 working days for standard production orders, and 10–15 working days for orders requiring custom colours or dimensions. Konak Tel Çit delivers to the door across Turkey via its own distribution network and contracted logistics companies. For export orders, we can work on FOB, CIF, or DAP terms; customs documents and certificates of origin can also be provided when required.
The written warranty we provide at Konak Tel Çit is: 10 years for galvanised coating, 5 years for electrostatic powder coating, and 2 years for structural integrity of weld joints and panel geometry. The warranty is valid under conditions of use compliant with EN 10244 (galvanised wire) and EN 13438 (powder coating) standards; intentional damage, vandalism, and natural disasters are excluded from coverage. For product issues covered under warranty, free replacement is carried out from our nearest depot point.
Konak Tel Çit has authorised distributors in more than 50 provinces across Turkey; the distributor network is ideal for local stock and rapid delivery. For large-volume project purchases, public tenders, and export orders, our direct sales department at our Aksaray headquarters becomes involved; this channel offers engineering support, site surveys, and project-based pricing. Please contact us via our contact page or WhatsApp line to determine which channel is most advantageous for you.
Related Products

Fencing

Our Products
Bulk QuoteWhatsApp