CHAIN-LINK MESH M² WEIGHT CALCULATOR
Enter the mesh openings (m1, m2) and wire diameter (d) to get the weight per square metre of woven chain-link mesh. For PVC-coated wire, also enter the outer diameter (D). The result is an average value in grams per m².
Inputs
Formula
m = 12,940 × d² / ((m1 + m2) / 2) (g/m²)
m1, m2: mesh openings (mm), d: wire diameter (mm), D: outer diameter incl. PVC (mm). These are industry-standard average coefficients; ±5 % deviation is normal depending on weave tightness.
Result
No calculation yet
Enter the mesh openings and wire diameter, then press Calculate; the result will appear here.
Standard Mesh Types
The hot-dip galvanised chain-link types most frequently produced by Konak Tel Çit, given as mesh opening × wire diameter. Production tolerance ±5 %.
| Mesh type (opening × wire, mm) | Weight per m² (g) |
|---|---|
| 50 × 50 / 2.5 | 1,617 |
| 50 × 50 / 3.0 | 2,329 |
| 55 × 55 / 2.5 | 1,470 |
| 60 × 60 / 2.5 | 1,348 |
| 60 × 60 / 3.0 | 1,941 |
| 70 × 70 / 2.8 | 1,449 |
| 80 × 80 / 3.0 | 1,456 |
| 80 × 80 / 3.5 | 1,981 |
| 100 × 100 / 3.0 | 1,165 |
Production tolerance
Per TS EN 10223-2, tolerance on the mesh opening is ±5 % and on wire diameter ±0.06 mm. A 3 % waste allowance is typical when sizing site orders. Roll heights are typically 1.0 – 2.0 m.
Coating options
Konak Tel Çit chain-link is produced with electro-galvanised (Class A, 40–120 g/m²) or hot-dip galvanised (Class B, 200–245 g/m²) coating. Green PVC (RAL 6005) over-coating is also available for extended field life.
